How to open the appdata folder in windows 10

The AppData or Application Data folder is a default hidden system folder that stores all information about registered users and installed programs. According to the developers, this folder should not be of interest to the owner of the system, and therefore is hidden. However, with active use of Windows 10? the size of this folder can grow rapidly. As a result, the user may be faced with a lack of free space on the hard disk. In addition, it is impossible to make changes about the PC user without access to the files in this folder.

See also: What to do if all folders on a USB flash drive have become shortcuts?

Where is the Appdata folder located in Windows 10?

If you need to find the Appdata system folder in Windows 10, you first need to enable the display of hidden folders and files. To do this, we perform the following actions:

Open Explorer and click on the "View" tab, select "Options".

A new window will open. Go to the "View" tab, check the box "Show hidden files" and uncheck the box "Hide protected system files".

After that, go to the address: drive C, folder "Users" or "Users", a folder with your nickname and "Appdata".

You can also get to the Appdata folder using the "Run" line. To do this, do the following:

Press "Win + R" and enter "% appdata%".

It should be noted that not all files from this folder can be moved or deleted. For example, the Local folder contains files that appeared as a result of the installed programs. This file cannot be transferred to another computer. Also located here is the Temp folder. Here you can delete it. It stores temporary files that are not needed for the system to work.

The second Roaming folder contains custom files that are allowed to be moved, deleted and performed various operations.

The LocalLow folder contains files that were created as a result of the work of browsers and extensions.

SoftikBox.com

Where is appdata located on windows 10

Not all files on windows 10 can be found and opened in the usual way, although they are "very close", for example, the appdata folder - they are hidden.

Hidden ones store personal information of users or system files that are dangerous to modify.

Over time, the AppData folder may contain a lot of unnecessary files, and if the hard drive is small, then free space may not be enough.

Also in windows 10, as in the seven or eight, sometimes you need to make changes to personal files, and for this you often need to find and open the appdata folder.

To find the place where it is located, you first need to make hidden files visible in windows 10.

You can find out how to do this in windows 10 by looking at this entry (it is described there with pictures).

Then you can see her. The appdata folder is located in the following path:

Drive C => Users or Users => your name => "AppData" folder.

As you can see after making simple changes, you can now find and open many files and folders that were previously undercover. Good luck.

vsesam.org

The folder "Appdata" where is located on Windows 10 and several ways to open it

Over time, the AppData folder may contain a lot of unnecessary files, and if the hard drive is small, then free space may not be enough. We will show the folder "Appdata" where it is located on Windows 10 and how easy it is to find it.

Also in windows 10, as in seven or eight, sometimes you need to make changes to personal files, and for this you often need to know where the "Appdata" folder is located in windows 10.

"Appdata" where is located on Windows 10

To find the place where the "Appdata" folder is located on Windows 10, you first need to make hidden files visible in Windows 10.

Then you can see her. The folder "Appdata" is located in the following path:

Drive C => Users or Users => your name => "AppData" folder.

As you can see after making simple changes, you can now find and open many files and folders that were previously undercover.

A quick way to find "Appdata"

The easiest and fastest way to open the AppData folder is from the Start menu. To do this, you must first press the Windows button on your keyboard.

In order to find the folder "Appdata" you need to enter the command% appdata% (with percent signs) and press the enter key. After that, the "Appdata" folder will immediately open in front of you.

What is the "Appdata" folder for?

The folder "Appdata" is used by many programs and computer games to store their settings and other data that they need to work.

For example, when installing the Opera web browser, the program itself is installed in the Program Files folder, but the user profile is located in the AppData \ Roaming \ Opera folder. At the same time, the Google Chrome web browser is completely installed in the AppData \ Local \ Google folder. The situation is similar with many games. For example, the popular computer game Minecraft stores its settings and mods in the AppData \ Roaming \ .minecraft folder.

In this article, you can find out where the appdata folder is located in Windows 10. The article will be relevant for all modern versions of Windows.

How to find the Temp folder in Windows 10

The Temp folder in Windows 10 is designed to store temporary files that are necessary for the system or some application to work. Unfortunately, the contents of this folder are not always automatically cleaned up after completing a specific task. Therefore, users often clear this folder manually. However, in order to delete unnecessary files from this folder, you need to know how to find the Temp folder in Windows 10.

See also: How to delete temporary files in Windows 10

How do I get to the Temp folder on Windows 10?

There are several Temp folders in Windows 10. They are all stored in various locations, namely:

C: \ Temp;
C: \ Windows \ Temp;
C: \ Users \ YOUR_USER_NAME \ AppData \ Local \ Temp \.

To get to these folders, you can manually go to the specified addresses or perform a few simple steps.

Method number 1. With the line Run

Press "Win + R" and enter "% TEMP%".

A folder with temporary files will open.

Method number 2. Using the address bar of File Explorer

In order to get to the Temp folder in Windows 10, open Explorer and enter "% USERPROFILE% \ AppData \ Local \ Temp" or "% TEMP%" (without quotes) in the address bar.

How do I clear the Temp folder on Windows 10?

You found out where the Temp folder is in Windows 10. Now you can clear it. To do this, you should use the following recommendations.

Method number 1. Standard Temp Cleaning

We open the Explorer. Right-click on the C drive and select "Properties". A small window will open. Click "Disk Cleanup".

We put a mark next to the item "Temporary files" and click "Clear".

We are waiting for the completion of cleaning the folder.

Method number 2. Using a .bat file

To create a .bat file, do the following:

We press "Start", select "Notepad".
In "Notepad" insert the line "rd% temp% / s / q md% temp%".

Save the file as "% appdata% \ microsoft \ windows \ start menu \ programs \ startup \ cleantemp.bat". Thus, you create a batch file, cleantemp.bat, in the Startup submenu of your Start Menu. The generated bat file will be loaded automatically.

Method number 3. Using Task Scheduler

Launch Task Scheduler. To do this, go to the "Control Panel", "Administrative Tools" and select "Task Scheduler".

A new window will appear. We select "Create a simple task". We set any task name, and in the actions we specify “forfiles.exe / p“% TEMP% ”/ s / m * / d -3 / c“ cmd / c del / F / Q / A @file ”” and “forfiles. exe / p "% TEMP%" / s / m * / d -3 / c "cmd / c rd / S / Q @file" ".
We set the task execution time. The Temp folder will be cleared automatically.

It is important to note that the last two methods are suitable for clearing the temporary files folder of only one user. If your PC has several profiles, then cleaning must be done for each profile separately.

How to transfer Temp folder to Windows 10?

To avoid going to the address: C: \ Users \ USER_NAME \ AppData \ Local \ Temp \ every time, the folder with temporary files can be moved to the top-level directory, for example, to the C: \ Temp folder. To do this, do the following:

We call the properties of the system. A new window will open. In the menu on the left, select "Additional system parameters".

A new window will open. Go to the "Advanced" tab and click on the "Environment Variables" button.

A new window will open. You can see two variables in it: TEMP and TMP. For both variables, click "Change" and enter a new value for the variable: "C: \ Temp".

After completing the above steps, the location of the folder with temporary files will change.

SoftikBox.com

AppData - what is this folder and how to work with it?

Users of the Windows Vista operating system were the first to find an unknown folder on their computer, and the question immediately arose: what is this folder AppData? Attention to it was caused due to the fact that it occupied a considerable part of the computer's memory, and sometimes its weight reached 10 GB or more.

Since there were few Vista supporters compared to Windows 7 users, the issue was not so global. Later, however, more and more questions related to the mysterious folder appeared.

The settings for detecting this folder are slightly different in Windows 10, so it makes sense to analyze all the subtleties of the question. At the same time, it is important to remember the main rules of programmers and not to violate the operation of the entire system by cleaning seemingly "unnecessary" files or cause its complete destabilization.

In addition, it will be useful to learn about which vulnerabilities are selected by one interesting virus associated with this very AppData folder to download and defeat the system. All this will help protect and secure your PC and prolong its proper functioning.

Interesting?

Then we continue!

In simple terms, in this folder all kinds of "necessary stuff" is stored, which is saved from the work of programs, games, settings. It also has history, bookmarks, and the like. This information is stored in the hope that all this may someday be needed by the user.

The more time the system is running, the more the size of this folder increases due to new data and information, and the less free disk space remains. If you get to this folder, then inside it you can see three more following folders, like:

"Roaming". The user can freely transfer the contents of this folder if necessary, for example, when reinstalling the entire system, to a removable disk and then return everything back to its place, keeping the personal settings in their original form. It also stores all information from browsers and bookmarks that the user saves.
"Local". The contents of this folder are mainly local data that cannot be migrated along with the user profile. For example, you can find saved games or downloaded files here.
"LocalLow". The third folder contains the most protected from prying eyes data and files that cannot be transferred. These files function only in a well-protected mode, which guarantees an adequate level of security for their content.

The contents of the folder are shown in Figure 1.

Rice. 1. Contents of the Appdata folder

Finding a folder is not difficult at all, for this it is important to follow a few simple instructions. Since this folder is classified as hidden, first you need to configure the display of hidden folders on your computer. In Windows XP, the task is solved in the following way:

you need to click on the folder with the left mouse button;
then you should go to the properties of the folder;
then go to the "View" tab;
check the box next to the command "Show hidden files and folders".

Rice. 2. How to install the command to display hidden folders on Windows XP

The settings can be changed just by opening the folder properties. When it comes to Windows 7 and Windows 8, then there is no such quick and easy access. Folder settings can be found in the "Control Panel". There you need to select in the "folder options", as shown in Figure 3.

Rice. 3. Path to the search for the "Folder options" command.

Rice. 4. How to install the command to display hidden folders on Windows 7 and Windows 8

It is important to remember one important detail that can affect the correct operation of the entire system.

As for the Appdata folder, you need to make sure that it does not contain the files required for the operation of some programs. To do this, just go to the folder and see its contents.

In fact, a lot of "necessary stuff" from the AppData folder can be deleted and, accordingly, increase the amount of free space. However, the entire folder cannot be deleted, because many system and user files use the contents of Appdata in their work.

If her data were deleted, it would immediately lead to a disruption in the system. Each user can analyze which files are not needed and which will not affect the correct operation of the OS, after which you can selectively clean up unnecessary data and only at the moment when they are inactive.

By and large, the search for the AppData folder practically does not differ from the same path that must be done in the "seven" and "eight".

The only difference is that in order to open the Control Panel itself, in which you can configure the folder properties, you need to do a little different steps. In this OS, there are two control panels: one classic, to which most PC users are accustomed, and the other - an abbreviated one.

The classic panel contains many more tools that the user can use to control. The abbreviated panel, in turn, opens the most frequently used commands, and with its help it is even easier to find the required section.

Many reviews suggest that the changes were surprising, but how do I find AppData in Windows 10? To do this, again, you need to go to the "Folder Options" section, which can be accessed through the "Control Panel". The search process is as follows:

right-click on the "Start" menu;
select the required line for setting;

Rice. 5. How to find the "folder options" section through the classic control panel to display the Appdata folder.

After that, you need to do the same steps as in the seven and eight, to configure folder properties and display hidden files. The AppData folder will then be visible to the user, and as a result, its contents can be cleaned or moved.

To begin with, it is important to remember that deleting a system program will cause the most dire consequences for the entire OS. Therefore, if there are files of some system program in the AppData folder, it is better not to touch them.

However, if the file to be deleted is not a system file, then there are several options for deleting it.

In some cases, as soon as the user clicks the "uninstall program" button, the system does not allow this action to be taken. This is due to the fact that it is currently active and in use.

Therefore, you first need to close the program itself by stopping its workflow, after which it will be guaranteed to uninstall it without hindrance. This is very important for cases when the user wants to remove something from the Appdata folder.

If the program to be removed is running in the background or invisible, then to stop it you need to:

press simultaneously "Alt", "Ctrl" and "Del";
go to the "Processes" section;
select the desired program by name;
press the button "end the process".

Rice. 6. Working with the task manager to complete the process of a certain program.

When you are completely sure that the program is no longer needed, you can search for it by name among the general list of programs installed on your computer and uninstall. After the done operation, the AppData folder can be cleared of all unnecessary information.

For many viruses, AppData is a favorite download location. Since the folder is hidden, it can be viewed using a common program such as Total Commander. Only in this program you need to press the button "Show hidden / system files". This will remove the virus.

Rice. 7. Button "Show hidden / system files" in Total Commander

It is almost impossible to see the virus by simply looking through the folders, since its name is well disguised and poorly recognized. That is why it is important to regularly scan your computer using antivirus software.