Minelab service center. Repair of metal detectors and coils - fortune service center. What breaks most often

All FISHER ground metal detectors are covered by a 5-year warranty, and search coils - 12 months from the date of purchase of the metal detector. The warranty does not cover batteries, accessories and accessories.

Disclaimer for Concurrent Damage:

The seller is under no circumstances responsible for any damage (including all, without exception, cases of loss of profits, business interruption, loss of business information, or other monetary losses) associated with the use or inability to use the purchased equipment.

Devices that are not subject to warranty repair:

With traces of alteration (modernization).
With mechanical damage.
Exposed to moisture.
With traces of electrolyte in the battery compartment.
Failed when used for other purposes.

In case of problems with the metal detector:

Read the user manual carefully.
Check the batteries, it happens that metal detectors do not work or do not work correctly due to discharged batteries. For correct operation of the metal detector, use high-quality batteries from well-known manufacturers.
Attention! It is FORBIDDEN to use salt batteries in metal detectors Fisher F2, Fisher F4, Fisher F5 by the manufacturer! Use alkaline batteries or high-quality batteries of the appropriate size ("crown")!
If you have a FISHER F70 or FISHER F75, reset the settings to the factory settings (how to do this is described in the operating instructions).
Check the specifics of your device in the support service.

If you need to send the device to service center:.

Describe in detail the malfunction of the device and the circumstances under which it manifests itself ("Does not work", "does not work correctly" is not a description of the malfunction), indicate contact information, attach a completed warranty card. In the absence of a warranty card, the warranty period is calculated in accordance with the serial number.
Clean the device from contamination, remove the batteries, pack the device and the coil (s) in a container that will prevent damage during shipment, and attach the accompanying papers there. Do not ship rods, headphones, or other accessories.
Take the device to the seller or send it to the service center yourself. Forwarding rules, see the "Contacts" section.

Driving directions, opening hours and other information can be found in the section

Service center "Leader-SC" offers high-quality and fast repair metal detectors Minelab in Moscow. We fix any breakdowns of metal detectors of these models: CTX 3030, CTX 3030 RUS, E-Trac PRO RUS, E-Trac Professional, E-Trac RUS, Eureka Gold, Excalibur 2, Explorer E-Trac, Explorer E-Trac Rus, Explorer SE Professional, Go-Find 20, Go-Find 40, Go-Find 60, GPX 4500, GPX 4800, GPX 5000, GPX-4800, GPX-5000, GPZ 7000, Pro-Find 25, Safari, Safari PRO Pack, SDC 2300 , Sovereign GT, X-Terra 305, X-Terra 505, X-Terra 705, X-Terra 705 DD 10.5 ", X-Terra 705 Dual Pack, X-Terra 705 Gold Pack, CTX 3030 and others.

Prices

*the prices are for the work, the cost of the part is not included

For all work performed and installed parts, our service center provides a guarantee.

Repair conditions in our service center

It is very easy to use the services of our service center:

Call by phone in Moscow (495) 771-52-79 and describe your problem. Our experts will help you determine the most likely cause of the breakdown and the approximate cost of repairs, or
You can come to our place and bring the device to free diagnostics... If the defect is not clear, we accept the machine and print a receipt for you. After diagnostics, we inform you about the exact reason and the cost of the repair.
Ask a question with help on the site. We will answer you by phone, if you specify in the request, or by e-mail.
If the cost is acceptable- we repair. You take the finished device, check it - pay for the repair, get a guarantee.
If the cost turns out to be high- you take the device "without repair" without paying anything.
Courier service- the courier will deliver your device to the service center and bring the repaired one back. Check the possibility of using this service with a consultant by phone in Moscow (495) 771-52-79 .

What do you need to repair a metal detector? It all depends on the nature of the malfunction. Some breakdowns are easily eliminated on their own, while others require contacting a service center. Repair of metal detectors in Moscow is carried out in many service centers specializing in the repair of such equipment. Here, the faulty device will be examined by specialists who are familiar with the principles of metal detectors. They know what breaks down most often in such equipment, which allows them to significantly speed up the repair work - they are helped by knowledge in the circuitry of metal detectors.

Finding a workshop that repairs metal detectors in Moscow is not as difficult as it seems at first glance. Of course, such equipment cannot be handed over to a service where TVs or computers are repaired - the circuitry is slightly different here. But is it worth taking a metal detector for repair if you can deal with some breakdowns on your own?

Most often, problems arise with those elements that are in motion and in work. Agree that the body of a car rarely breaks down, while the chassis breaks down much more often. The most common breakdown in metal detectors is the absence of a normal contact in the connector with which the search coil is connected to the device. As a result, it is not necessary to count on normal searches, since the coil is constantly disconnected. What to do?

Take the metal detector to the nearest service - you will have to pay money for this. The amount of payment depends on the appetite of a particular service;
- To cope with the problem yourself is absolutely free. And with the money saved, you can buy some useful accessory.

In order to restore contact, it is necessary to tighten the contacts of the search coil connector with a regular needle. This must be done carefully so as not to break anything. To improve contact, wipe the contacts with alcohol or cologne. That's all the repairs, for which a certain sum of money would have to be “unfastened” in the nearest service center. The same applies to any other connections - the integrity of the contacts can always be restored by yourself. But in the event of complex malfunctions, you should be puzzled by the repair of a metal detector in one of the service centers in Moscow.

Metal detector coil repair

Intensive use of metal detectors often leads to the formation of cracks on plastic elements. Here the housings of electronic blocks crack, plastic armrests break, cracks appear on the search coils. It would seem that cracks cannot affect the performance of the equipment in any way - they only spoil it. appearance... But in fact, this is far from the case, because water can get into the metal detectors through the cracks. If it gets into the electronic unit, then breakage cannot be avoided - water will damage system board, causing corrosion and damage to individual elements of the electronic circuit.

Search coils are most often filled with resin, so cracks here are not always scary. But water that gets into the connector of the coil can cause a lack of contact - water leads to corrosion of the metal, causing a contact failure. It is easy to remove moisture from the coil connector; you just need to let it dry properly or dry it with a hair dryer. After that, it is necessary to thoroughly clean the contacts to remove traces of corrosion - this is done with alcohol and improvised tools. Cracks formed in plastic are sealed with any suitable glue. Any moisture resistant adhesive is suitable here, including epoxy resin. Having sealed the cracks, you will return the tightness to the connector, after which you can safely go in search, including underwater ones.

A similar repair in a service center can result in a pretty penny. Therefore, it is best to deal with such minor malfunctions on your own, without spending money on the services of repair shops and authorized service centers - you should contact here with serious malfunctions, the elimination of which requires certain knowledge and tools.

Improper transportation, storage and operation of the metal detector can cause interruptions in its operation or even complete failure of the equipment. If your metal detector stops functioning properly, contact our qualified specialists. We carry out professional Minelab repair in Moscow offering its clients the most favorable and convenient conditions for cooperation.

If you are interested, we will be happy to help in solving all your questions. Our employees promptly identify the main causes of the unit malfunction and quickly eliminate equipment breakdowns of varying degrees of complexity. The specialists of our company have extensive experience in diagnostics, maintenance and repair of various models of Minelab metal detectors.

Prompt detection of the cause of the device breakdown, the ability to perform minor, medium or large repairs, as well as reasonable prices for restoration and repair services make contacting us as convenient and comfortable as possible. With our help, you can quickly restore the performance of your metal detector by resuming various search operations.