How to connect an Apple Watch. How do I turn on my Apple Watch correctly? What if iWatch won't turn on? Preparing Apple Watch to Move to a New iPhone

Smart Apple watch Watch is not a must-buy gadget for everyone - however, using them can simplify a number of tasks. For example, listening to music without using an iPhone or determining physical activity that people who monitor their health may need. Knowing how to use iWatch, you can receive SMS messages and phone calls- moreover, not only from iPhone, but also from models on Android OS.

Turning on

The first question for the user of the watch arises about turning it on. There are three ways how to turn on Apple Watch :

Switching off is performed by the same side button by holding it until the Off slider appears on the screen. and swiping it. Or just cover the watch with your palm - the light sensor will work and the screen will turn off.

Setting up a smart watch

The next important question is how to set up Apple Watch for further work. To do this, you need an iPhone, preferably with latest version operating system iOS. The first generation smartwatch required an iPhone 5. The Apple Watch Series 3 sold since September 2017 cannot be set up without an iPhone 6 model.

In order to connect Apple Watch to iPhone, you need to sync the devices with each other. The pairing process with the third series of watches will not take long:

The Watch application is downloaded to the smartphone, in which the button for pairing with a smart watch is pressed.
The iPhone is brought up to the watch.
On the watch, a similar button is pressed in the settings.
The viewfinder of the iPhone camera is aimed at the watch screen, where a picture resembling a galaxy appears.

After a certain time, which is required for gadgets to synchronize, it becomes possible to set up a smart watch directly from an iPhone.

If synchronization is not required (another iphone will be connected to the watch), unpair Apple Watch as follows:

Open the Watch app on your smartphone.
Select the "My watch" tab at the bottom of the window.
Select the connected Apple Watch and click on the " i ".
Click Unpair Apple Watch.
Confirm the cancellation of device synchronization, after which all data about the watch will be deleted from the gadget.

First setup

To create a pairing with Apple Watch, an iPhone (with Bluetooth enabled) is brought to the watch and the following steps are performed:

1. After a message appears on the phone screen about the possibility of starting the configuration, press "Continue".

2. Position the center of the watch display exactly opposite the iPhone's camera viewfinder.

3. Choose the hand on which the gadget will be worn.

4. Introduce Apple password ID with which the user has access to various services.

5. Configure geolocation, the Activity application and, if necessary, mobile communications from the iPhone.

6. Install applications from the online store, set up various useful services.

The first time you use it, you will have to spend more time setting up. Other parameters (including the password for accessing the gadget) can be changed later. This does not always require an iPhone - some of the settings are available from the watch.

For example, to change the watch face on the Apple Watch just press hard on the screen. A gallery of watch faces will open. You need to scroll through it with a swipe gesture and choose the option you like.

It will not be difficult and change language on Apple Watch... It is enough to go to the screen for writing a message or reply, with an effort to press the display. The language selection button will appear. And also the replacement is performed from the smartphone - the language selected for the iPhone for dialing SMS is automatically set on the watch.

Digital Crown Button

A novice watch user may be interested in information about the Digital Crown in Apple Watch. What is it and what functionality does it have? The main purpose of the part is scrolling through images, lists and maps, controlling sound, font sizes and other sliders. It is possible to call with its help a list of telephones, to which you can then send a dictated SMS message or call.

Additional Digital Crown features include:

opening the last running application by double-clicking;
activation voice assistant Siri with a long press;
use as a Home button;
transition to watch faces.

With this element the user can quickly switch between different applications... To do this, double-click on the wheel. It also takes screenshots of the watch screen - but only if you press it simultaneously with the side button.

Synchronization with Android OS

If you don't have an iPhone, you should know how to connect your Apple Watch to Android - although the functionality will be severely limited. To synchronize mobile gadgets, the user is required to:

Install the Aerlink: Wear Connect for iOS application on your phone by downloading it from the Play Market;
Download the BLE Utility to the smart watch;
Launch Aerlink by activating the iOS Service;
Open the Peripheral tab in the BLE Utility application on your watch.

Sometimes synchronization is not performed the first time, so you have to repeat the steps. The paired watch and smartphone do not form a real pair, as when using an iPhone. Apple Watch in this case can only monitor the phone charge, receive SMS and call notifications. There are no options for sending a message, making a call or answering it.

Multimedia

When all the settings are complete, you can start downloading useful information to your smart watch - including multimedia files. When synchronizing with an iPhone, it becomes possible download music to Apple Watch to listen to it even when you're not paired with your AirPods wireless headset. Instructions for uploading audio files to your watch are as follows:

The Watch application is launched on the smartphone and the music folder opens.
The required number of melodies is selected (about 2 GB is available on a smart watch, which is enough for 150-200 tracks).
Start synchronization of the created playlist, which may take from 10 minutes to several hours.

Synchronized ringtones can be played directly from the watch, even if the iPhone is turned off, not charged, or is far enough away. Before starting, you first need to change the music source in the Select Source settings menu. The result is the ability to use the Apple Watch as an iPod.

How to set up WhatsApp

Since the developers of the application have not yet adapted WhatsApp for the Apple Watch, its functionality may be somewhat limited. To set up notifications, you need to:

Download WhatsApp to your phone;
In the Watch app on the iPhone, set the appropriate switch.
In the WhatsApp settings on your smartphone, activate all the items in the Notifications menu.

To uninstall an application, just turn off the setting on the iPhone that is responsible for using the application on the Apple Watch.

Sports functions

In the default list installed applications smart watch has a utility called "Activity", which allows you to track physical activity and determine a number of indicators:

the "Mobility" ring is responsible for counting calories burned;
the "Exercise" ring monitors the intensity of your workouts;
the warm-up ring monitors the user's activity during periods when he moved for at least 60 seconds. contract.

To receive detailed information to fill the rings, just swipe up. With another swipe, you can get data on the number of steps, distance traveled, information about training.

The app also allows Change the goal of the activity on Apple Watch. To do this, you must forcefully click on any screen in the "Activity" program and set the required Calories. Changing Warm Up and Exercise tasks is not available.

Apple Pay

Among the convenient functions of the gadget is the ability pay with Apple Watch instead of a bank card. To do this, you will have to connect to the appropriate service using your Apple ID profile. In order to set up Apple Pay on Apple Watch, you need:

Open the program first on the iPhone.
Transfer it to your watch using the Watch app.
Add a card to the list.

Cards that have already been used to pay for purchases in App Store or iTunes Store are added by entering their security code. The new payment method will have to be photographed iPhone camera and follow all instructions in the application. Sometimes it takes a few minutes for the bank to verify the identity of the cardholder.

To pay by hours you need:

make sure that the store accepts payment in this way (one of the symbols);
double-click the side button to use the default map;
keep the watch display at a distance of several centimeters from the contactless reader;
wait for a slight pulsation of the clock.

Protection features

Inexpensive smartwatches are protected against counterfeiting and theft. To check Apple Watch for authenticity open the settings of the gadget and find the field with the serial number (IMEI) in the "General" menu. For the third generation of watches, such an opportunity is available using an iPhone synchronized with them. The device information contains all the necessary information, including the IMEI. Can be found serial number and on the watch case or strap connector.

The model is protected from unauthorized access with a password. It is not necessary to install it, but if you have confidential information on your watch, you should take care of protection. Sometimes users have questions, how to unlock Apple Watch if you forgot your password... It's easy to do - just remember your Apple ID and reset your watch.

Reset Apple Watch to factory settings you can use the paired iPhone and the watch app installed on it. The information is erased directly from the gadget - after connecting to the charging cable, disconnecting with the side button and selecting the item to delete content and settings in the menu that appears. After the reset, the password disappears; to continue working with the Apple Watch, you will have to sync with your smartphone and go through the setup procedure - or restore a backup.

Firmware upgrade

For smart watches, it is possible to replace the old firmware. To update Apple Watch OS 4 need an iPhone with the latter iOS version... User actions in this case should be as follows:

Make sure that the watch is charged at least 50%, connect it to the charger.
Connect the iPhone to a Wi-Fi network, put it next to the clock.
Open the Watch program on the phone, go to the main settings and select the software update item.
Download update - sometimes you have to enter a password to do this.

The flashing may take about an hour. During the update process, you cannot remove the watch from charging, close the Watch application on your phone, and restart at least one of the synchronized devices. Knowing how to flash Apple Watch, you don't have to worry that the operating system installed on the gadget will become outdated and will not support new functions.

If the smartwatch is frozen, restarting it will help restore its performance. To restart Apple Watch you can use two ways:

By pressing the side button and swiping across the screen when the Power Off menu appears. The key is held down until the manufacturer's logo appears.
By pressing the side button and the Digital Crown at the same time, releasing them only after a reboot.

To increase the operating time of the smartwatch, there is a battery saving mode in the options list. When using it, the gadget only shows the time and cannot sync with phones. Auto turn on Eco mode occurs when the battery power drops to below 10%. Thanks to this, the watch can work for several more hours. If you want to turn off eco mode on Apple Watch, the gadget will have to be restarted using the side button. Automatic shutdown occurs after charging.

To charge Apple Watch use a special cable and power adapter connected to the mains. The gadget should be put on Charger back side and wait until the charge indicator shows 100%. The process of restoring the battery capacity takes up to 2 hours. After that, the gadget will work for 18 hours in normal mode and will hold a charge for up to two days, if you just use it as a clock.

How to find Apple Watch using iPhone

To find your watch, you need an iPhone, iPad, or iPod touch with iOS 10.3 or higher, and the Apple Watch itself must be turned on.

Install the application Find iPhone;
Log in (login and password Apple ID from account in iCloud);
In the My devices tab, select Apple Watch;
Select an option Actions... If Apple Watch is turned on, it is possible to track its location on a map, mark it as lost, delete all data from the device, or play sound signal for clock detection.
If you are confident that the Apple Watch is in close proximity, you can press Play sound... The watch will start emitting a repeating beep;
If the clock is found, you should turn off the sound by clicking on the option Close on the dial.

Application Find iPhone will be useless if iWatch is turned off or out of Wi-Fi zone. In this case, you must use the Lost Mode in Find iPhone to lock the device and track its location. When someone finds and turns on your watch, you will immediately receive a corresponding notification.

How to connect Apple Watch to Wi-Fi

Connecting to Wi-Fi makes it possible to use the advanced functionality of the gadget, for example:

use the voice assistant Siri;
create Reminders and Calendar Events;
control Apple TV;
receive and send messages.

The connection is made automatically to Wi-Fi networks, in which the iPhone previously associated with the watch was registered.

Consider the features of manual connection:

Make sure your iphone has Bluetooth and Wi-Fi turned on;
check if the devices are connected to each other;
disable Bluetooth, the watch will be connected to the smartphone only via Wi-Fi;

Now you can use all the functions of the Apple Watch even at a great distance from the iPhone. Bluetooth range is only 10 m, but when this connection the watch's battery is consumed less frequently.

How to turn off Voice Over on Apple Watch

There are two ways to turn off screen sound:

Place two fingers on the display. To resume dubbing, you must do the same.
In order to completely turn off the voice acting, you must open the Settings in the clock menu. Next, the General tab, then select Accessibility and it remains to click on the VoiceOver button.

How to track sleep

Unfortunately, the developers do not provide a built-in sleep tracker on the Apple Watch. But there is an opportunity to use third party applications for analysis, for example:

AutoSleep.
Sleep ++
Sleep Tracker.
Pillow (perhaps best app for sleep monitoring. In addition, there is a Smart Alarm function).

How to measure pressure

Apple Watch does not measure blood pressure. On the net you can find information only about future developments of the company for the implementation of this function in subsequent watch models.

Apple Watch notifications don't come

Decide this problem the following actions will help:

disabling the wrist recognition function;
disable Do Not Disturb or Screen Lock mode;
break and re-pair;
reset the settings;
cleaning the sensors that adhere to the wrist.

How to change the strap

This is very easy to do. So, for example, you can change a boring or worn out sports strap for a leather one, or even a Milanese mesh bracelet. Fortunately, the choice on the market is simply huge.

To change you need:

Turn the clock face down;
Press the strap fixing button;
Slide the strap to the side while holding the release button.

This article will discuss how you can connect your Android watch to your iPhone. Finally, it became possible, and you don't even have to jailbreak your Apple smartphone.

The first to do this was a programmer under the nickname Mohammad AG: in support of them, a video was published, where it is clearly seen that notifications from the iPhone are perfectly transmitted to the wonderful "smart" watches. Unfortunately, the craftsman never released his application for synchronization, which was successfully accomplished by other programmers, thanks to which any owner of both a smartphone and a tablet from Apple can easily connect an Android smartwatch to his gadget.

It is noteworthy that for the first connection, you still have to use a phone based on the operating system from Google. It is to him that you first need to connect your watch. As an example, the Sony SmartWatch 3 has been associated with Xperia smartphones Z3. After that, you will need to install on your smartphone free app Aerlink, which will instantly appear in the main menu of the smartwatch.

For the next manipulation, you will need to use the iPhone. From the app store, you need to download a small utility BLE Utility and run it. Next, we take the watch and open the previously downloaded Aerlink program on it and try to search for devices. While the watch is looking for a smartphone, on the iPhone, go to the Peripheral tab.

Now the devices are guaranteed to find each other, you just need to enter the connection code without errors. This is how the working connection between iOS and Android Wear is done.

Possibilities

What can a smart watch paired with an apple gadget do? Any notifications work just fine. When you swipe any of them, the notification will instantly disappear on your smartphone. Music control does not raise any questions: both volume control and rewind work. Of course, accepting and rejecting calls also works great, and the look of the “dialer” on the watch is made in a style very reminiscent of iOS.

disadvantages

Not without a fly in the ointment. For example, the watch shows all the time that an error occurred while connecting to an Android smartphone. Also, the Internet does not work, therefore, Google voice control is not available. You will not be able to reply to an incoming message with your voice, and a long text does not unfold.

But, the utility provides features previously unavailable for iOS users. In addition, thanks to the utility, the watch works with both iOS and Android devices, and the battery consumption remains the same. This method with a clock on Android is suitable for those who, for whatever reason, do not like the recently released ones or want to get a round "smart" watch at their disposal.

(or pair with another iPhone), then you will certainly face the need to untie the device from the iPhone (unpair). It is very simple to do this: you just need to perform a number of simple actions, and you can do this even in the absence of a smartphone.

You may also need to unlink Apple Watch from iPhone if one of the gadgets malfunctions.

How to untie (unpair) Apple Watch from iPhone if both devices are in front of you - method 1

1 ... Place both gadgets next to each other;

2 ... Open the Apple Watch application on the smartphone;

3 ... In the window that opens, at the bottom, there will be a menu “ My watch"- click on it;

4 ... After that, you should click on the item " Apple Watch", On the next screen you must click on "I".

5 ... By clicking on the " Unpair Apple Watch», You must confirm the cancellation of device synchronization, after which all data about the clock will be deleted from the communicator.

How to untie (unpair) Apple Watch without iPhone - method 2

It is possible to untie the watch from the smartphone, even if both devices are not close to each other (for example, if the iPhone is lost). To do this, go to the application " Settings"On Apple Watch (gear icon), go from there to the section" The main", Select the menu" Reset"And click on the item" Erase all content».

This action will reset your Apple Watch to factory settings (all data will be deleted) and will also unpair the existing iPhone pair.

How to untie (unpair) Apple Watch from iPhone, if the watch has a passcode, but you forgot it

There is a method to unlink the Apple Watch from the iPhone, even if a passcode was set on the watch, which you, by an absurd accident, forgot. For this:

1 ... Set Apple Watch to charge.

2 ... Press and hold the side button until the slider appears Off.

3 ... Press hard on the slider Off and swipe up, then a button will appear on the watch screen. Erase content and settings.

4 ... Click on the button Erase content and settings and confirm the action. The watch will be reset to factory settings (all data will be deleted), in addition, the Apple Watch will be unlinked from the iPhone.

In the fall of 2014, Apple introduced the world to the "smart watch" Apple Watch. When buying them, many actions will become available to you, provided that you have an apple smartphone no older than model 5. Apple Watch is connected to iPhone and has the ability to exchange information.

Manufacturers have taken care of features such as:

sending messages (voice control, the watch does not have the usual keyboard due to its size);
pulse diagnostics;
the ability to use Siri functions;
reading simple emails their removal, and selection;
the ability to download music no more than 2GB;
synchronization with iPhone, exchange of information and applications supported with the Watch.

Display 1.5 inches or 1.32 in the smaller model. Protected by sapphire crystal. Reacts to pressing force.

On the side of the device there is a button-wheel that you use to perform basic functions and a floating key at the bottom (for calls and messages). See the photo.

2 core processor coupled with GPU. A reasonably good navigation system is provided with a GPS receiver. Communication takes place via Bluetoot and Wi-Fi. In 2016, Apple released a watch for the second Apple generations Watch Series 2.

Setting up Apple Watch

If you are using a non-updated iPhone to 5 (more early versions do not support the watch), updates to the Watch apps are not required. Accordingly, if you follow the updates of your smartphone, then they are also necessary on the watch. Before you start setting up your watch, make sure they are charged.

How to connect Apple Watch to iPhone

Let's take a look at how to pair your Apple Watch. To do this, follow your intuition and device prompts, you can easily figure out how to create an iPhone and Watch binding.

So, if the watch is charged less than 60%, then it needs to be charged. The time taken to recharge will be equal to one hour, but sufficient recharging will be required while the devices are connected.

How to turn on Apple Watch

Press the button on the side. A language prompt appears on the screen. After determining the interface language, the device will switch to the mode of creating a binding to the smartphone.

Launch the Watch program and click the pairing button that appears, bring the phone camera to the image on the watch (the devices should be nearby while the synchronization is in progress, as in the photo).

Then follow the iPhone activation prompts. Set up as new or restore (if not the first watch) and select your hand (left or right). To use the Digital Touch and Handoff functions, you must enter your Apple ID password in the field that appears. You will be prompted to turn on iPhone search. Turn it on.

Synchronization

Diagnostics, geolocation and Siri must be in sync.
Create a password and determine if the iPhone will automatically reset the lock from the watch.
When you click Install All, the programs from your phone will appear on the Watch, when you click Later, only basic information appears. Synchronization time depends on the number of linked programs.
When the previous operation is completed, the device will beep. On the Internet, you can always find a video review on this topic.
Installing updates on the watch.
Open “My Watch” in the Watch application
Then "Basic" and "Software Update"
Further messages about updates will appear (if, of course, they are required). Install following the prompts.
If all compatible programs on Apple Watch were not set up automatically from the "My Watch" item, you will have to download them manually.
You can set up notifications by clicking on "Notifications" in the item "My watch".
It is possible to adjust the brightness of the screen through the section "Brightness and text size".

How to use Apple Watch

The screen is activated when you bring the watch to your eyes and goes out as soon as you take your hand away. You can find all the answers to questions related to the use and setting of the clock in the manual attached to them. The instruction in Russian describes in detail how to use the watch. On the web, you can find a video overview on how to set up a binding or how to set up a clock.

By activating the Activity App, you can control physical activity, rest time. The device notifies you about the amount of time spent walking or motionless and reminds you of a change in position. In the item "Health", you can track your condition.

When you press the wheel on the side once (see the first photo), it becomes available:

turning on the screen;
you can go from the main tab to the watch face;
return to the main page while in the application;
activate Siri
with the help of "Preview" you can always be aware of your important affairs.
If the Watch does not turn on, it is better to restart the watch. How to restart Apple Watch is described in detail in the instructions.
You can configure it again after which the devices are included in the work, and you already know how to configure.
You can make an urgent call by pressing the side button or using voice command... It is possible to send a template message.

Apple Watch 2 can be immersed in water for up to 30 minutes and no deeper than 1 meter. When creating the Apple Watch Series 2, the manufacturers of the epl company tried to take into account the needs of a modern person who wants to save time, but at the same time play sports, relax, work, and be aware of their business. But Apple warns against bathing your Apple Watch in salt water while showering in smart watch is not prohibited. The clock works even in water, as shown in the photo.

The watch does not have a camera for creating a photo, apparently due to the fact that the entire smart mechanism is in a small metal box.

Description of how to untie Apple Watch from iPhone

If there is a need to sell devices or change iPhones, you need to break their synchronization. This can be done without a smartphone by following a few simple steps:

Bring the devices closer. Open Apple Watch.
In the menu "My Watch" go to Apple Watch and mark the letter "i" located opposite.
Then click the "Unpair Apple Watch" item. Thus, all data will be deleted.
Another way to decouple when devices are not nearby.
We go into the clock settings.
Click on "Basic".
We press "Reset".
And we erase all the data that was synchronized. This will reset the information to the factory settings.
A way to unlink the watch from the iPhone if the password is forgotten.
We put smart watches on charge.
Press the wheel on the side and hold it until "Off" appears on the screen.
We click on the shutdown and on the appeared "Erase content and settings". The data is deleted and the devices will be unlinked.

- full-fledged computer on your wrist. This small device can do a lot and its capabilities are constantly expanding. Below is a short list of tips and information to help you get started with your Apple Watch. So, our 10 tips for newbies with Apple Watch!

Connecting Apple Watch to iPhone

First, check if Bluetooth is turned on. Connect the watch to the mains to recharge. Turn on your Apple Watch (press and hold the side button under the Digital Crown until the Apple logo appears). Select the interface language Apple Watch.

To pair your watch and phone:

Open the application " Apple Watch" on ;
Click "Start pairing";
Point your phone camera at the watch to display Apple Watch hit the appeared on the screen iPhone yellow outline;
The watch will connect to iPhone and you will continue to either set the watch as new (or restore a copy from the backup, if you have already used the watch and made backups);
Choose on which wrist you will wear the watch;
Agree to the iTunes Terms of Service;
Enter your Apple ID;
Click "OK" on the next 3 pages with information about location services, "" and diagnostics;
Set a password. The password must be entered on the Apple Watch;
Indicate whether you want the watch to be unlocked simultaneously with the iPhone;
Choose how you want to install applications. If applications on your iPhone there are versions for watches, then they can all be installed automatically, or you can later independently install only the programs you need;
Wait for the devices to sync.

How to control Apple Watch

Apple Watch is controlled by a single physical button, the Digital Crown, touch screen and the voice assistant "Siri".

The button is used to call the "Friends" application and to turn on / off the watch. The Digital Crown is a kind of Home button. Pressing the wheel returns to the main screen, double pressing returns to the last running application and rotating the Digital Crown changes the scale.

The Apple Watch was the first Apple device to feature Force Touch. This means that in addition to the usual touches and swipes (smooth movements of the fingers across the screen), the watch understands the force of pressing. Depending on how strong the touch was, the watch reacts differently.

It will help you send a message, make a call, add an appointment to your calendar, and much more. Press the Digital Crown to launch Siri.

Almost all device settings can be made using the Apple Watch app on your iPhone.

Turn off / restart Apple Watch

To turn off the watch:

Press and hold the side button until the menu appears;
Select the desired action: shutdown, save power, or lock.

Important! If you select the power saving mode, then you can exit it only when connected to a charger.

If the device freezes and does not respond to your actions, then simultaneously hold down the side button and the Digital Crown until the Apple logo appears.

How to take a screenshot

To take a picture Apple screen Watch:

Hold the side button;
Press and release the Digital Crown.

After this manipulation, a white flash will appear on the watch screen and a shutter sound will sound, and the finished screenshot will be added to the "Camera Roll" of your iPhone.

Installing and uninstalling applications

Adding an application to the watch can be divided into 2 stages: download and installation.

For loading:

Go to the "Selection" tab;
Find the application you need and download it as you usually do with iPhone applications;

For installation:

Open the Apple Watch app on the iPhone;
In the "My Watch" tab, scroll down the list to the application you need;
Click on the name of the application;
In the menu that opens, activate the option "Show application on Apple Watch";
Confirm the installation of the app on the watch.

To uninstall the program, you must turn off the option "Show application on Apple Watch" or use the method familiar to everyone from the iPhone. Hold your finger on the Apple Watch desktop for a few seconds, when all the icons start to "shake" click on the cross next to the application to uninstall.

Change the look of the watch face

To replace and adjust the dial, do the following:

Press firmly on the set dial;
Use swipes to select the watch face you want.

If you want to further customize the watch face, then click "Customize". The dial setting menu consists of 3 pages: detail, color, additional information.
Use swipes left or right to move between pages, and use the Digital Crown to adjust / change;
After completing the setup, click on the "Digital Crown".